2000
Year
HOLLAND JACHTBOUW
Builder
100' (30.48m)
Length
3
Cabins
IKARON - 2000 100' HOLLAND JACHTBOUW
Genoa Liguria Italy
($2,760,791 USD est.) €2,650,000 EUR
Yacht for sale is a 2000 HOLLAND JACHTBOUW 100' "IKARON" Sloop in Genoa, Liguria, Italy.
Sloop IKARON is 30.48m and was built by Holland Jachtbouw. She was delivered in 2000 and refit in 2022.
Her hull, built in Aluminum, has a beam of 7.19m, a draft of 3.63m and was designed by Andre Hoek.
IKARON's MTU 6R 183 TE62 275 kW6 cylinder engines deliver 385 horsepower, enabling her to cruise easily at 9 knots and achieve a maximum speed of 11 knots.
Sloop IKARON can accommodate 8 guests in cabins, all looked after by a crew of 4.
IKARON is currently available for sale and is asking €2,900,000. She is available for viewings in Genoa, Italy.
Get more information on this listing
LENGTH
30.48m
BUILDER
HOLLAND JACHTBOUW
ASKING PRICE
($2,760,791 USD est.) €2,650,000 EUR
BUILT (REFIT)
2000 (2022)
BEAM
7.19m
DRAFT
N/A
MAX SPEED
11 Knots
CRUISING SPEED
9 Knots
CABINS
3
GROSS TONNAGE
111.00
DISPLACEMENT
111000 Kg
LOCATION
Genoa, Liguria, Italy
Get more information on this listing
FULL SPECIFICATIONS
owner cabin
• Full beam with two double beds either side
• Luxurious en-suite bathroom, with stall shower
Guest Cabins
• Two double twin cabins port and starboard forward
• Port forward cabin is equipped with an en-suite bathroom
Crew Area
• Two bunk cabins port and starboard
• Crew mess with U Shaped sofa, all electric controls
• Crew bathroom that doubles as an en-suite for the port forward guest cabin
Cockpit
• Two helm stations equipped with all sail controls
• Fantastic 360º views over and along the deckhouse
• Large table with U shaped sofa in blue leather port side
• Navigation and transmission equipment starboard side
• Steps into the upper deck salon and lower deck salon
REFIT DETAILS AND UPGRADES
2021
• Mast and rig pulled out of boat and all rigging removed for inspection
• All running rigging replaced
• Cabling, lights, and electronics checked, serviced or replaced
• Hydraulic furles serviced and rebuilt by Rondal
• Hydraulic halyard rams serviced
• Hydraulic aft stay tensioners serviced
• Hydraulic boom van serviced
• Mast & boom re-installed and tuned
• New Furuno radar and navigators installed
• New PC screens
• New cockpit resolution waterproof monitor
• New B&G processor and triton
• New Gyro-track compass installed
• All batteries serviced and or replaced
2022
• New electric motor
• Variable pitch gear box taken out, dismantled and serviced. All new
• Marine gearbox “Twin Disc” taken out and rebuild, new seals &
bearings.
2023
• Under water Hull sand blasted, inspected
• Propeller, shaft, variable pitch system and gear box works:
• Variable pitch propeller “Teignbridge” dismantled and serviced
• Propeller shaft pulled out, taken to machine shop. Installed in lathe,
checked for wear & torsion, cleaned. Was in perfect condition.
• Propeller shaft bearings serviced. oil and water seals, both engine
room side and water side, all replaced.
• Propeller shaft oil bath oil replaced
• Propeller shaft aft “cutlass bearing” replaced
• Main engine rubber support blocks replaced (all 2 )
• Propeller shaft & main engine re-aligned. Boat sea trials showed
perfect alignment.
• Rudder pulled out full service
• Rudder lower and upper bearings serviced
• Steering system & steering quadrant serviced
• New bearing Laghersmith
• Zink anodes new
• Brand new sails
• New tender Geniuss 320
Aft Deck
• Offers access to the lazarette
• Hydraulic swim platform
• Hydraulic swim platform
